CHANGZHOU PIONEER TEXTILE TECHNOLOGY LTD
Focus on Innovation, Strive for improvement
Add to Cart
GT330D dewatering geotube for Palm oil waste water treatment without adding flocculant
Who are we?
We, PioneerTEX is a professional manufacturer of geotube and geobag in China.
We could produce many types of geotube and geobag as per customer's project request.
All bags and fabrics could be customized.
PIONEERTEX Geotube & Geobag Product List are as below:
PIONEERTEX GEOTUBE SPECIFICATION.pdf
What is a Geotube?
PioneerTEX GeoTube (PioTube) dewatering bag is a containment system designed for dewatering a wide variety of sludge types and sands.
It is integrated with single or multiple pieces of PioneerTEX's high-strength synthetic technical fabric and is theoretically applicable to diverse dimensions.
How do a PioneerTEX Geotube work?
Gravimetric drainage of the sludge is accompanied by a volume reduction.
Due to the special opening size of the geotextile fabric used to form the tube, the solid components of sludge are captured inside the tube whereas the water can escape from the geo-tube.
Is Polymer Flocculant Necessary for Dewatering?
Normally, tt is necessary to add polymer flocculant for dewatering, which should be added to the slurry before pumping it into the tube.
The purpose of the polymer additives is to flocculate the fines, and to increase the dewatering efficiency.
Can we do a trial on the geotube before purchasing?
Yes, of course! We will make one small model bag for your trial. Small Geotube size is 50cmX50cm.
Based on the results of preliminary field testing with small PioTube,the appropriate amount of additives can be defined.
What is GT330D geotube?
GT330D sludge dewatering geotube is made of 100% special PP round monofilament with big opening size in black color.
It's especially designed for palm oil waste water dewatering treatment.
The dewateing bag size can be made to order.
PioneerTEX GT330D specification was as below:
| Material: PP Monofilament Yarn woven geotextile for Geotube | ||||
| Material Quality Code: PIONEERTEX-GT330D | ||||
| Mechanical Properties | Test Method | Unit | Typical Value | |
| MD | XD | |||
| Tensile Strength | ASTM D 4595 | KN/M | 50 | 50 |
| Elongation at break | ASTM D 4595 | % | 25 | 15 |
| Seam Strength | ASTM D 4884 | KN/M | 25 | |
| CBR Puncture Strength | ASTM D 6241 | KN | 3 | |
| Hydraulic Poperties | Test Method | Unit | Typical Value | |
| Opening Size(AOS) | ASTM D 4751 | mm | <=0.8 | |
| Permittivity | ASTM D 4491 | l/s | >=1.0 | |
| Anti-UV(500hours) | ASTM D 4355 | % | 85 | |
| Physical Properties | Test Method | Unit | Typical Value | |
| Mass Per Unti Area | ASTM D5261 | G/M2 | 380 | |
Packaging: PP woven fabric outside in Black color.
Shipping Port: Changzhou Port or Shanghai Port.
MOQ: 25 pcs.
1. Is stock available?
Pioneer: We are very sorry that we don't have stock for this material.
General production lead-time: 3-4weeks.
2. Can you offer the 3rd party testing report.
Pioneer: Yes, we can. However, the testing cost would be client's side or share half by each other.